Le site des utilisateurs francophones actuels et futurs d'AmigaOS 4.x

Auteur
avatar

Pseudaxos

Forum » » OS4 toutes plateformes confondues » » AmigaOS4.1 Update 2

Posté : 18-04-2021 18:43 icone du post

Voici l'usb.log dans ram:T/

I: [18:33:59] USB stack | | ==========

I: [18:33:59] USB stack | | USB System Software Task started

I: [18:33:59] USB stack | | Starting HCDs...

I: [18:33:59] USB stack | New Fkt | Attached RootHub Fkt 0x6FF9EA00 at level -1 on HCD "ohci.usbhcd" unit 0

I: [18:33:59] USB stack | New Fkt | Attached Fkt 0x6FF9EAA0 at level 0 on HCD "ohci.usbhcd" unit 0

I: [18:33:59] EHCI Controller Task Unit 0 | EHCI | Another driver seems to use the PPC460ex USB hardware. Sending shut down notification.

W: [18:33:59] OHCI Controller Task Unit 0 | OHCI | Received request to shutdown unit 0.

W: [18:33:59] OHCI Controller Task Unit 0 | OHCI | Releasing lock for unit 0.

I: [18:33:59] EHCI Controller Task Unit 0 | EHCI | Successfully locked PPC460ex USB hardware.

I: [18:33:59] USB stack | New Fkt | Attached RootHub Fkt 0x6FF9EB40 at level -1 on HCD "ehci.usbhcd" unit 0

I: [18:33:59] USB stack | New Fkt | Attached Fkt 0x6FF9EBE0 at level 0 on HCD "ehci.usbhcd" unit 0

I: [18:33:59] USB stack | | ...HCDs started.

I: [18:33:59] USB Fkt Init | Init Fkt | [fkt 0x6FF9EAA0] Fkt is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}

I: [18:33:59] USB Fkt Init | Init Fkt | [fkt 0x6FF9EBE0] Fkt is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}

I: [18:33:59] USB Fkt Init | Init Fkt | [fkt 0x6FF9EAA0] Fkt ("","Rear Roothub (ohci.usbhcd/0)","") initialized

I: [18:33:59] USB Fkt Init | Init Fkt | [fkt 0x6FF9EBE0] Fkt ("","Rear Roothub (ehci.usbhcd/0)","") initialized

I: [18:33:59] hub.usbfd | HUB | Hub "Rear Roothub (ohci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0 (ifc 0x6FDD9100)

I: [18:33:59] hub.usbfd | HUB | Hub "Rear Roothub (ehci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0 (ifc 0x6FDD91C0)

I: [18:33:59] hub.usbfd | HUB | All ports are empty (ifc 0x6FDD9100)

I: [18:33:59] hub.usbfd | HUB | All ports are empty (ifc 0x6FDD91C0)

I: [18:33:59] hub.usbfd | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated

I: [18:34:00] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)" (ifc 0x6FDD91C0)

I: [18:34:00] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed (ifc 0x6FDD91C0)

I: [18:34:00] USB stack | New Fkt | Attached Fkt 0x6FF9EDC0 at level 1 on HCD "ehci.usbhcd" unit 0

I: [18:34:00] hub.usbfd | HUB | Device on hub port 1 successfully added (ifc 0x6FDD91C0)

I: [18:34:00] EHCI Controller Task Unit 0 | EHCI | Port 0 is not in reset state.

I: [18:34:00] USB Fkt Init | Init Fkt | [fkt 0x6FF9EDC0] Fkt is {Vendor: 0x0424, Product: 0x2517, Class: 09.00}

I: [18:34:00] USB Fkt Init | Init Fkt | [fkt 0x6FF9EDC0] Fkt ("","","") initialized

I: [18:34:00] hub.usbfd | HUB | Now configured to use multiple TTs (ifc 0x6FDD9440)

I: [18:34:00] hub.usbfd | HUB | Hub "" has TT thinktime of 8 full speed bittimes and protocol 2 (ifc 0x6FDD9440)

I: [18:34:01] hub.usbfd | HUB | Device found on port 1 of hub "" (ifc 0x6FDD9440)

I: [18:34:01] hub.usbfd | Hub port | Device at port 1 of hub "" is low-speed (ifc 0x6FDD9440)

I: [18:34:01] USB stack | New Fkt | Attached Fkt 0x6FF9EF00 at level 2 on HCD "ehci.usbhcd" unit 0

I: [18:34:01] hub.usbfd | HUB | Device on hub port 1 successfully added (ifc 0x6FDD9440)

I: [18:34:01] hub.usbfd | HUB | Device found on port 2 of hub "" (ifc 0x6FDD9440)

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x6FF9EF00] Fkt is {Vendor: 0x04F2, Product: 0x0736, Class: 00.00}

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x6FF9EF00] Fkt ("Chicony","","") initialized

I: [18:34:01] USB FD fkt start | BindInterfaceDriver | No interface driver of fkt 0x6FF9EF00/ifc 0x62B6B410 {Class 03.00} has been found

I: [18:34:01] hub.usbfd | Hub port | Device at port 2 of hub "" is high-speed (ifc 0x6FDD9440)

I: [18:34:01] USB stack | New Fkt | Attached Fkt 0x625E31F0 at level 2 on HCD "ehci.usbhcd" unit 0

I: [18:34:01] hub.usbfd | HUB | Device on hub port 2 successfully added (ifc 0x6FDD9440)

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x625E31F0] Fkt is {Vendor: 0x1A40, Product: 0x0101, Class: 09.00}

I: [18:34:01] hub.usbfd | HUB | Device found on port 7 of hub "" (ifc 0x6FDD9440)

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x625E31F0] Fkt ("","USB 2.0 Hub","") initialized

I: [18:34:01] hub.usbfd | HUB | Hub "USB 2.0 Hub" has TT thinktime of 8 full speed bittimes and protocol 1 (ifc 0x625A9D40)

I: [18:34:01] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed (ifc 0x6FDD9440)

I: [18:34:01] USB stack | New Fkt | Attached Fkt 0x625E3510 at level 2 on HCD "ehci.usbhcd" unit 0

I: [18:34:01] hub.usbfd | HUB | Device on hub port 7 successfully added (ifc 0x6FDD9440)

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x625E3510] Fkt is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}

I: [18:34:01] hub.usbfd | HUB | Driver Running (ifc 0x6FDD9440)

I: [18:34:01] USB Fkt Init | Init Fkt | [fkt 0x625E3510] Fkt ("Generic","Ultra Fast Media ","000000225001") initialized

I: [18:34:01] USB FD fkt start | BindInterfaceDriver | No interface driver of fkt 0x625E3510/ifc 0x625A31D0 {Class 08.06} has been found

W: [18:34:01] USB FD fkt start | Fkt FD launcher | [0x625E3510] Could not bind any suitable interface driver to fkt

I: [18:34:02] hub.usbfd | HUB | Device found on port 1 of hub "USB 2.0 Hub" (ifc 0x625a9d40)

I: [18:34:02] hub.usbfd | Hub port | Device at port 1 of hub "USB 2.0 Hub" is low-speed (ifc 0x625a9d40)

I: [18:34:02] USB stack | New Fkt | Attached Fkt 0x62199350 at level 3 on HCD "ehci.usbhcd" unit 0

I: [18:34:02] hub.usbfd | HUB | Device on hub port 1 successfully added (ifc 0x625a9d40)

I: [18:34:02] hub.usbfd | HUB | Device found on port 2 of hub "USB 2.0 Hub" (ifc 0x625a9d40)

I: [18:34:02] USB Fkt Init | Init Fkt | [fkt 0x62199350] Fkt is {Vendor: 0x046D, Product: 0xC218, Class: 00.00}

I: [18:34:02] USB Fkt Init | Init Fkt | [fkt 0x62199350] Fkt ("Logitech","Logitech RumblePad 2 USB","") initialized

I: [18:34:02] USB FD fkt start | BindInterfaceDriver | No interface driver of fkt 0x62199350/ifc 0x6214fb00 {Class 03.00} has been found

W: [18:34:02] USB FD fkt start | Fkt FD launcher | [0x62199350] Could not bind any suitable interface driver to fkt

I: [18:34:02] hub.usbfd | Hub port | Device at port 2 of hub "USB 2.0 Hub" is full-speed (ifc 0x625a9d40)

I: [18:34:02] USB stack | New Fkt | Attached Fkt 0x62088290 at level 3 on HCD "ehci.usbhcd" unit 0

I: [18:34:02] hub.usbfd | HUB | Device on hub port 2 successfully added (ifc 0x625a9d40)

I: [18:34:02] hub.usbfd | HUB | Driver Running (ifc 0x625a9d40)

I: [18:34:02] USB Fkt Init | Init Fkt | [fkt 0x62088290] Fkt is {Vendor: 0x04F2, Product: 0x0976, Class: 00.00}

I: [18:34:02] USB Fkt Init | Init Fkt | [fkt 0x62088290] Fkt ("Chicony","Wireless Device","") initialized

I: [18:34:02] USB FD ifc start | BindInterfaceDriver | No interface driver of fkt 0x62088290/ifc 0x6214fe40 {Class 03.00} has been found

I: [18:34:02] USB stack Process | | USB System Software Process started.

I: [18:34:02] USB stack Process | | Reading FD descriptors...

I: [18:34:02] USB stack Process | | ...FD infos read

I: [18:34:02] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x62B6B290 is being preempted.

I: [18:34:02] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x6214FE00 is being preempted.

I: [18:34:02] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x6214FE80 is being preempted.

I: [18:34:02] USB stack Process | | Starting HCDs...

I: [18:34:02] USB stack Process | | ...HCDs started.

I: [18:34:02] USB stack Process | | USB stack fullbooted

I: [18:34:02] hid.usbfd | HID driver | Interface 0x62b6b290 claimed by someone else

E: [18:34:02] hid.usbfd | HID driver | Binding interface 0x62b6b290 failed. Error -11

I: [18:34:02] hid.usbfd | HID driver | Interface 0x6214fe00 claimed by someone else

E: [18:34:02] hid.usbfd | HID driver | Binding interface 0x6214fe00 failed. Error -11

I: [18:34:02] hid.usbfd | HID driver | Interface 0x6214fe80 claimed by someone else

E: [18:34:02] hid.usbfd | HID driver | Binding interface 0x6214fe80 failed. Error -11

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x6214fe80 bound

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x6214fe00 bound

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x62b6b290 bound

E: [18:34:03] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x6214fb00 bound

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x62b6b410 bound

E: [18:34:03] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000

I: [18:34:03] hid.usbfd | HID driver | USB Interface 0x6214fe40 bound

E: [18:34:03] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000

I: [18:34:11] USB FD fkt start | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated

I: [18:34:11] USB FD fkt start | BindInterfaceDriver | No interface driver of fkt 0x625e3510/ifc 0x625a31d0 {Class 08.06} has been found

W: [18:34:11] USB FD fkt start | Fkt FD launcher | [0x625e3510] Could not bind any suitable interface driver to fkt

E: [18:34:11] bootmouse.usbfd | | Error Claiming Interface

I: [18:34:11] USB FD fkt start | BindInterfaceDriver | No interface driver of fkt 0x62088290/ifc 0x6214fe80 {Class 03.01} has been found

Cet article provient de Le site des utilisateurs francophones actuels et futurs d'AmigaOS 4.x
https://amiga-ng.org/viewtopic.php?topic=2667&forum=6