---

Forum » » Création-Développement » » SMARTDock : une production AmiOuest France

---

Posté : 04-02-2014 07:55

Je confirme le non fonctionnement avec une carte sii3114ide.device, aucune information n'est récupérée (tout à 0).


J'utilise un disque dur Samsung de 1,5 To :


=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD154UI
Serial Number: S1XWJ9AS805774
Firmware Version: 1AG01118
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Not recognized. Minor revision code: 0x52
Local Time is: Tue Feb 4 07:47:50 2014 GMT

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Lorsque je tape smartctl -a sii3114ide.device:1 , j'obtiens :

10.Workbench:> smartctl -a sii3114ide.device:1


smartctl version 5.33 [Cygwin AmigaOS4 cross compiler] Copyright (C) 2002-4 Bruce Allen
Home page is http://cvs.sourceforge.net/projects/smartmontools/

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD154UI
Serial Number: S1XWJ9AS805774
Firmware Version: 1AG01118
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Not recognized. Minor revision code: 0x52
Local Time is: Tue Feb 4 07:50:55 2014 GMT

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18325) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 32) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9340
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2347
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 6822
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2347
13 Read_Soft_Error_Rate 0x000e 253 253 000 Old_age Always - 0
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 0
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 087 067 000 Old_age Always - 218955789
194 Temperature_Celsius 0x0022 082 067 000 Old_age Always - 18 (Lifetime Min/Max 0/4621)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 336915
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 253 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Quoiqu'il en soit : très beau boulot les gars ! Bravo à la glorieuse équipe d'AmiOuest France !

---

Cet article provient de Le site des utilisateurs francophones actuels et futurs d'AmigaOS 4.x
https://amiga-ng.org/viewtopic.php?topic=1783&forum=14